EV Charger
Smart & Full Protections
Features & Functions (Optional)
- Suitable for both indoor and outdoor use
- Suitable for single and three phase
- Adjustable current, up to 32A (22kW)
- Scheduled Charging
- 4G, WIFI, Bluetooth, APP, OCPP 1.6J compatible
- Emergency Stop
- 2 Connectors (guns)
- With cable or with socket
- 3 shapes and 2 colors (black, white)
- DLB (Dynamic load balancing)
- RFID (Radio Frequency Identification Devices) card
Protections
- Over Voltage Protection
- Under Voltage Protection
- Over Current Protection
- Short-circuit Protection
- Over Temperature Protection
- Electric Leakage Protection
- Lightning Protection
- Ground Protection
- CP Signal Abnormal Protection
- Fire Protection, Anti-pressure Protection
- RCM (Residual Current Monitoring)
DLB (Dynamic Load Balancing)
When the EV charger is working with other household appliances at the same time, the total current will easy to overload and causing power cuts.
With an external transformer and a settable value of max main current, the EV charger will automatically adjust the charging current (10A-32A) to fit the settled value. So the total household current will not be overloaded due to charging.
| RCCB Type | Symbol | Feature |
|---|---|---|
| AC |  |
Alternating Current only |
| A |  |
Full type AC features + Detection of pulsating current with DC components |
| B |   |
Full type A features + Detection of high frequency currents up to 1 kHz + Smooth DC currents |
RCM (Residual Current Monitoring)
If DC or AC leakage occurs during charging process, the charger will break the circuit immediately. And the charger will recover automatically after the fault is cleared.
Also the charger will do the function self-check on the RCMU (Residual Current Monitoring Unit) before every charging.
According to IEC 61851, for the residual current protection of EV charger, the AC charging should be equipped with type B RCD or type A + 6mA smooth DC RCD.
RFID (Radio Frequency Identification Devices) Card
Tap and start to charge automatic.
Prevent from unauthorized users.
5 cards with one EV Charger. Function setting of the DIP Switch as following pics.
Main Ratings
| Item | Ratings |
|---|---|
| Rated Voltage | 230Vac (1 phase), 400Vac (3 phase) |
| Rated Current | 10-32A |
| Maximum Power | 7.3kw(1 phase), 22kw (3 phase) |
| Charge Mode | Mode 3 in according with IEC 61851-1 AC charging |
| Rated Short-circuit Current Icn | ＜10kA (accord. to EN 60898-1) |
| Over Voltage Protection | In according with IEC 60664 |
| RCM(Residual Current Monitoring) | RCCB type B, in according with IEC 62955 |
| Lighting Protection | in according with IEC 61643 |
| Fire Protection | UL94v-0 |
| Anti-pressure Protection (Connector) | Falling from 1 m, 2-ton car crushing |
| Cable Connector Versions | Type 2 cable, In according with IEC 62196-1/2 |
| Buttons | Emergency stop, Physical adjustment |
| Indication | Standby (Green), Charging (Flashing Green), Fault (Red) |
| Display | 7″ LCD |
| WIFI | Optional |
| 4G | Optional |
| Data Protocol | OCCP 1.6J |
| App | IOS /Android |
| CP Signal Abnormal Protection | Optional |
| RFID (Radio Frequency Identification Devices) | ISO 1443 A/B; ISO 15693 |
| Installation Environment | Indoor and outdoor |
| Mounting | Wall/Pole |
| Working Temperature | -30℃~50℃ |
| Storage Temperature | -40℃~70℃ |
| IP Performance | IP 55 |
| Maximum Altitude | 2000 m above sea level |
| Relative Air Humidity | 5%~95% (non-condensing) |
| Working Life | 10,000 times |
| Warranty | 3 years |